SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV

SMART_TUNE_Fuel_Controller_Chip_John_Deere_Gator_850d_855d_XUV_01_ly
SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV
SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV
SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV
SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV
SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV

SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV
Delivers 17% gain in horsepower and torque. 22% faster acceleration throughout the RPM range. Maxes out throttle response. 6 % fuel mileage improvement. Higher top end speed (if no factory speed governor is in effect). Engine reliability, durability not affected. In-built Auto Temp Compensation (ATC) system. Handheld design with digital display. You can go back to default factory fuel programming either by turning off the tuner or dialing the adjusting knob. Customized to your specific motor. Compatibility These ATV specific chips are sorted into numerous categories according to the operating range and type of IAT / MAF / MAP and oxygen sensor. Smart-Tune-X is available to all fuel injected ATV’s controlled by electronic engine management (ECU, ECM). Should you still be uncertain which chip fits your application. Feel free to contact our Online Tech Support 7 days a week via emails. Working Theory Improve the performance level potential of your quad and say adios to sluggish stock fuel trim with the next generation Smart-Tune-X power control chip module. Smart-Tune is a fully adjustable fuel controller, also referred to as fuel tuner, designed for fuel injected ATV’s. It is intended to remap the lean factory fuel map settings restricted by the manufacturers. This performance tuner simply wires in-line with the signal wire of factory Air Temp sensor, which is a standalone probe or a part of the integrated Mass Air Flow sensor, and wires into the exhaust air fuel sensor harness on emission-controlled quads in order to recalibrate fuel maps for maximum performance potential. Smart-Tune-X fuel controller is designed to trick the Engine computer into thinking that the intake air is much cooler, and then the ECU will send more fuel for a richer mix. Besides this it inhibits restrictions implied by the ECU on engines, and the exhaust gas consistency is monitored by emissions-control through an exhaust oxygen sensor. It also incorporates the outstanding In-built Auto Temp Compensation (ATC) system. With this fuel controller, your fuel injection settings get an extensive recalibration that delivers HP and torque you will notice instantly. The remapping chip works to optimize the fuel injection timing for max performance potential and more throttle sensitivity. Smart-Tune-X fuel management chip overrides engine sensor signals being read by the Engine computer, resulting in an adjustment to the fuel map settings which causes the increase in power capability as well as cranks up acceleration and engine response through the rotational speed range. Smart-Tune-X features new unsurpassed options that allow this power tuner to far outperform other ATV chips. These specific ECU chips are sorted into numerous categories according to the operating range and type of IAT / MAF / MAP and oxygen (if any) sensor. Smart-Tune-X chip is available for all EFI ATV’s controlled by Engine management. Tech Training On new generation fuel injected engines you are not able to adjust the AFR in order to add more horsepower with re-jetting, like on carbureted models. Smart-Tune-X chip’s primary intent is to make this adjustment to max out the engine power. Smart-Tune-X performance chip neither affects engine reliability nor durability. This fuel tuner is designed to fool the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix, besides on those engines, exhaust gas consistency is monitored by emissions-control system, through the exhaust oxygen sensor, the chip unlocks the restrictions developed by the Electronic Control Unit. These ECU chips are known to deliver unbridled horsepower to fuel injected ATV’s. Ramp up the performance potential of your quad. Some riders pay much attention to the exterior of their ATV while others prefer getting more horsepower and efficiency from the engine. The owners in general pick the second option rather than the first one. Magnum Tuning offers you an assortment of top-notch performance chips designed to optimize the engine, driveline, electronics, and other systems of the ATV. So if you are searching for stuff like that, the Smart-Tune-X performance chip is the best option. Smart-Tune-X ECU chip has been proven to be a great asset for boosting engine performance. It is unequivocally the upgrade your ATV is starving for. This fuel controller works in conjunction with your ATV’s engine management and does not affect engine reliability or durability. Worldwide popular Smart-Tune-X performance Chip can even quickly be switched on the fly, removed or re-installed at any time. Carbureted engines are not subject to being chipped hence nonexistent Electronic Engine Management referred to as ECU or ECM. On oxygen sensor models fitted with aftermarket exhaust or header, Check Engine Light (CEL, MIL, FI) is triggered until you wire up an oxygen sensor simulator in order to abolish ECU safe / limp mode. Signals fooled by Smart-Tune-X will be restored to factory by the ECU, until CEL issue is resolved completely. If top end speed is limited by factory speed governor, RPM is restricted by rev limiter, or you are about to override the factory red line RPM limit, then check out our REV Limiter. Claims correlate to factory condition engine. Defects or extensive wear and tear of related parts or systems such as oxygen sensor, sparkplug, fuel filter, injectors, injection or ignition system can result in no or minimum effect. Please get the vehicle checked by a certified mechanic prior to installation to avoid undesired inefficiency. Authentic Smart-Tune-X performance Chip had been invented, developed and furthermore it is only produced by Magnum Tuning. Similar products pictured or described identically on the net are counterfeits. Check the emission by-laws at your area in regards to street / use legality. Waterproof but not submersible. Inline with Intake Air Temp Sensor. Plugged to Oxygen Sensor (if any) signal wire. Ignition key activated +/- 12V power feed. Required Skill & Tooling. Do-It-Yourself – Basic Skill Required: identification of IAT and O2 sensors. Basic electronic contacting of wires and terminals Installation Please read instructions before installation. Basic Hand Tools Required. Installation Installation is Do-It-Yourself. Setup takes 30 minutes for a proficient installer while do-it-yourselfers may conduct it in an hour. You don’t have to get your hands dirty installing the Smart-Tune-X tuner. Setup and adjustment doesn’t require special talent of installer. Our easy to follow, step-by-step instructions will guide you, how to install your performance chip in an hour or less, if you are lil electronically inclined. Our certified mechanics who are actively involved in racing and high performance tuning are eager to assist you. Locate the IAT (Intake Air Temperature), which is a standalone sensor or the part of the integrated MAF (Mass Air Flow)/ MAP (Manifold Absolute Pressure) sensor on the intake. Cut the IAT signal wire and contact the purple wires to the two ends. Polarity is not critical. Find the Oxygen sensor (if any) in the exhaust. Cut the downstream O2 sensor’s signal wire between the O2 sensor head and the O2 sensor plug. Connect the black wire to the wire coming out of the oxygen sensor head. Connect the blue wire to the oxygen sensor wire coming out of the ECU harness. Fix the temperature sensor with any applicable method within or at the inlet of the air filter box where air flow enters the intake. Tip: Drill a 1/4 – 6mm diameter hole in the inlet side of air filter box to drive in the sensor. Seal the hole with silicon or putty. Contact the red hot wire of the red/black dual cable to the ignition feed +12V, and ground the black to the engine frame or battery negative. Leave the black and blue wire pairs disconnected if the factory oxygen sensor is not fitted or eliminated physically or electronically. For connections crimp with bullet connectors or solder the wires in place. For soldering the O2 sensor plated wires employ muriatic acid. Never power up the tuner on constant battery feed. Please find an appropriate ignition feed DC12V on either the consumer like the radio, wiper, or fuel pump activated by the ignition key, or tap into the main fuse box. In Lambda-Boost mode (emission-controlled ATV’s with oxygen sensor only) the Dual emission control system reads constant feedback through the fluctuation voltage of the stock oxygen sensor. Smart-Tune automatically identifies the sensor type and voltage range. The in-built oxygen sensor control unit helps to override that restriction that would be implied by the factory ECU programming, as long as other sensors’ signals are being tricked. When do you use this option? In the instance of street racing, hauling, or if other upgrades require you to do so. Depending on the engine management type or performance parts preinstalled, an oxygen sensor related trouble code check engine light (CEL) might be triggered by Lambda-Boost mode. If so, test the O2 sensor to see if it works in full fluctuation range. If the O2 sensor doesn’t work in full range, it is recommended to abandon this function. Turn on the ignition key. The 499-scale LED display lights up. Crank the engine and wait until it reaches operating temperature. Start the adjustment with quarter turns clockwise. After each turn test the throttle response, power and acceleration on the fly. Conduct comparative tests like 0 up to 15 MPH, 10 up to 50 MPH or 2000 up to 5000 RPM, etc, while riding your ATV.. Settings for your specific engine unfortunately cannot be predicted. Reset and restart: Dial the knob fully counterclockwise. When Smart-Tune is unpowered or the knob is turned fully counterclockwise, the engine runs in factory mode as if the wires were not cut. In this case, factory signal readings are delivered the ECU. On Oxygen sensor models if the exhaust was modified (header or free flow exhaust) and the check engine light is triggered, a Magnum oxygen sensor simulator should be wired up in conjunction with the Smart-Tune in order to remedy the ECU safe / limp mode. Claims correlate to factory condition engines. Malfunctions of either related engine component, can result in no or minimum effect. Please get the engine checked by a certified mechanic prior to installation to avoid undesired inefficiency. It is highly recommended that you perform a signal range scan on the O2 sensor (if any), the slightest defect might prevent the tuner from working efficiently. The case and screws are sealed. 1 x Smart-Tune-X Controller. 6 x Bullet Connector. 2 x Scotch Lock. 2 x Zip Tie. 6 x Heat Shrink Tubing. 1 x Installation Instructions. Detailed instructions included in the package. No Pick-Up service available. On the market for powersport and automotive performance parts, Magnum is widely acclaimed as a leader. For the Magnum performance part development team, it is crucial to have high quality standards, therefore we strongly believe in the importance of employing top notch technology to all of our reliable tuning upgrades and efficient fuel savers. Our devoted crew members of certified engineers, mechanics and technicians are actively involved in racing and high performance, and have worked tirelessly to earn their reputation. We cater to a huge array of vehicles, vessels and industrial applications. We stake our 23-year reputation for excellence on every upgrade we sell, a claim made possible only through extensive testing, stringent and rigorous assurance methods and thorough bench-testing. The item “SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV” is in sale since Tuesday, January 22, 2013. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Intake & Fuel Systems\Other”. The seller is “magnum_tuning_inc” and is located in Florida. This item can be shipped worldwide.
  • Brand: Magnum Tuning
  • Part Type: Adjustable Fuel Tuner
  • Manufacturer Part Number: SMATV-040
  • Warranty: 10-year factory defect warranty
  • Sold by:: The manufacturer
  • Installation – DIY:: No special skill or tool required
  • Torque gain:: 17%
  • Horsepower gain:: 17%
  • Design:: Waterproof – not submersible
  • Programming:: Adjustable
  • Fuel efficiency improvement:: average 6%
  • Intended use:: HP gain
  • Tech Support:: full – 7 days a week

SMART-TUNE Fuel Controller Chip John Deere Gator 850d 855d XUV

John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers

John_Deere_Gator_XUV_RSX_Pair_Polk_Audio_5_25_600_Watt_Rollbar_Tower_Speakers_01_ylsp
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers

John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers
Car Audio & Video. Package: Pair of Polk Audio DB522 5.25″ 600 Watts Total (300 Watts Per Speaker) Car, ATV, Motorcycle, or Boat Speakers + Pair of Rockville MAC525B 5.25″ Black Aluminum Wakeboard Tower Speaker Pod Enclosures. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Pair of Polk Audio DB522 5.25 600w Car Audio Marine/ATV/Motorcycle/Boat Speakers. (1) Pair of Rockville MAC525B 5.25 Black Marine Wakeboard Tower Speaker Pod Enclosures. Authorized Polk Audio Dealer! Everything you love about Polks Dynamic Balance technologythat rich, clean, full-range soundis built into the marine-tough, yet ruggedly sophisticated, DB+ series. And with its universal fit, it can be installed in any vehicle: Automobiles, motorcycles, boats, ATVsyou name it. High Performance Upgrade Upgrade from your OEM speaker system toward a bigger, fuller, high-performance sound. Universal Fit Simple drop in installation for any vehicle including cars, boats, ATVs — you name it. Zero Tweeter Protrusion A shallow tweeter design to ensure your factory speaker grille re-installs with ease for a flush, seamless look. Dynamic Balance Technology Patented process that guides material selection through rigorous testing that identifies and cancels out unwanted resonant frequencies. (2) Polk Audio DB522 5.25 600w Car Audio Marine/ATV/Motorcycle/Boat Speakers. High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems. Polypropylene and UV tolerant cone with waterproof inner and outer surrounds. Simple drop-in installation for any vehicle including cars, boats, ATVsyou name it. Zero tweeter protrusion and reduced mounting depth for a precise fit. Dynamic Balance technology offers a rich, clean, full-range sound. ¾, 20mm Tweeter ensures clear, balanced mids and highs. 100 Watts at Continuous Power; 300 Watts at Peak Power. Driver Compliment: 5.25 (133.35 mm). Tweeter Compliment: 0.75 (19 mm). Cut-Out Diameter: 4.76 (121 mm). Mounting Height: 0.31 (8 mm). Driver Mounting Depth – Bottom Mount: 2.01 (51.2 mm). Driver Mounting Depth – Top Mount: 1.74 (44.2 mm). Grille – Height: 17.55 mm. Driver Complement Mid / Woofer – Diameter: 5.25 (133.35 mm). Driver Complement Tweeter – Diameter: 0.75 (19 mm). Max Sensitivity: 91 dB. Nominal Impedance: 4 ohm. Total Frequency Response: 55Hz-22kHz. 600 Watts Peak Power Total Per Pair / 300 Watts Peak Power Per Speaker. 200 Watts RMS Total Power Per Pair / 100 Watts RMS Per Speaker. (2) 2.375 rubber inserts. (2) 2.25 rubber inserts. (2) 2.5 rubber inserts. (2) 2 rubber inserts. (2) 1.875 rubber inserts. (2) 1.75 rubber inserts. Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC525B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole. 6 precision molded high impact rubber inserts guarantee fitment on towers from 1.75 to 2.5. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister. These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC525B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means theyll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever! The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands. Pair of Rockville MAC525B 5.25 black aluminum can wakeboard tower enclosures. Made of high quality 6061 aircraft grade aluminum. Beautiful black powder-coat finish. 100% waterproof and fully marinized against salt and fresh water conditions. Internally wired for clean installno exposed wires or terminals. High efficiency design features the perfect airspace for 6.5 speakers. Rugged universal mounting clamps made of 6061 aluminum. Includes precision molded, high impact plastic inserts for tower fitment from 2 diameter to 2.5 diameter. Mounting Depth: 5.5 Inches (140mm). Mounting Hole Diameter: 4.8 Inches (122mm). Outside Diameter:6.6 Inches (168mm). Screw Diameter: 5.4 Inches (139mm). About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. This includes blown speakers with burned voice coils. Process for returning items. Item Code: DB522+MAC525B Deere. The item “John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers” is in sale since Monday, January 22, 2018. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Marine Audio”. The seller is “audiosavings” and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Martinique, Maldives, Nicaragua, Oman, Peru, Paraguay, Viet nam, Uruguay.
  • Brand: Polk Audio
  • MPN: DB522+MAC525B Deere
  • UPC: 613815866640
  • Type: Audio Package
  • Model: DB522+MAC525B Deere
  • Features: Waterproof
  • RMS Power: 100W
  • Bundle Listing: Yes
  • Country/Region of Manufacture: China

John Deere Gator XUV/RSX Pair Polk Audio 5.25 600 Watt Rollbar Tower Speakers