Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)

Lexan_Back_Panel_Loop_Clamps_John_Deere_GATOR_RSX850_RSX860_UTV_2013_20_01_lcg
Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)
Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)
Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)
Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)

Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)
Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Hard LEXAN BACK Panel. RSX 850 + RSC 860. 2 Person / Side by Side UTV. Soft Cab System: STANDARD. Loop CLAMPS (permanent) are used to attach the Back Lexan Panel to the roll bars. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Standard Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan no longer available. VENTED: Open/Close by sliding. Vents can be omitted if you wish. MADE TO ORDER FOR YOU! Busy months are September-February. Individually Hand Tailored for a Precision Fit. Will NOT bow at high speeds! Absolutely Top of the Line Product. Great Shelter from All Weather. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Photo 1-2: Shows Clear Lexan Back on another model of John Deere Gator. Note: I do not have a photo on the RSX at this time but will update when it becomes available. It will be similar to this one but will fit the exact curve of the RSX. Photo 3: Close up of LOOP Clamps you will be receiving to attach lexan to your ROPS / roll bars. Photo 4: Close up of the DOT stamp on each lexan windshield. TOP OF THE LINE PRODUCT DESCRIPTION. The HARD Lexan Back Panel is truly the top of the line! They are hand crafted and tailored. For a precision fit. All HARD Lexan Back Panels are made of 1/4 LEXAN and they will NOT bow at high speeds. The Hard Lexan Back Panel uses the best clamping system available. With the Loop Clamps. We line the sides with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. It comes with full installation instructions to make the install easy. All our products are backed by a one year mfg. This Hard Lexan Back Panel is Brand New. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit some models and years shown in summary above. Clear Lexan (Tinted no longer available). If you are looking for a quality enclosure for your UTV, look no further. Please check out the pictures. We show you many close up shots that others shy away from. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line Windshield. You won’t be disappointed! Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Panel secured using permanent LOOP CLAMPS. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing ABOVE states. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Fits: RSX 850 + RSX 860
  • Windshield: Yes – Lexan – 1 pc / Vents / Loop Clamps
  • Mfg. Warranty: One Year
  • Color: CLEAR Lexan 9034
  • SATISFACCTION GUARANTEED POLIC: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Surface Finish: 9034 Lexan – Clear
  • Manufacturer Part Number: USA-LBV-C JDG850
  • Part Type: UTV Lexan
  • Part Name: Clear Lexan Back Panel w/ Loop clamp
  • YEARS: 2013-2020
  • Placement on Vehicle: Rear
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

Lexan Back Panel + Loop Clamps John Deere GATOR RSX850 + RSX860 UTV (2013-20)

Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New

Lexan_Back_Panel_Loop_Clamps_John_Deere_GATOR_HPX_XUV_2015_2021_UTV_New_01_njiz
Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New
Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New
Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New
Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New
Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New
Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New

Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New
Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Hard LEXAN BACK Panel. Lower ABS Panel +. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2 Seats Side by Side UTV. For older model years, please refer to our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. Loop CLAMPS (permanent) are used to attach the Back Lexan Panel to the roll bars. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Standard Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan no longer available. VENTED: Open/Close by sliding. Vents can be omitted if you wish. MADE TO ORDER FOR YOU! Busy months are September-February. Individually Hand Tailored for a Precision Fit. Will NOT bow at high speeds! Absolutely Top of the Line Product. Great Shelter from All Weather. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Photo 1-5: Shows Clear Lexan Back with lower ABS Panel on a John Deere Gator. Photo 6: Close up of LOOP Clamps you will be receiving to attach lexan to your ROPS / roll bars. TOP OF THE LINE PRODUCT DESCRIPTION. The HARD Lexan Back Panel is truly the top of the line! They are hand crafted and tailored. For a precision fit. All HARD Lexan Back Panels are made of 1/4 LEXAN and they will NOT bow at high speeds. The Hard Lexan Back Panel uses the best clamping system available. With the Loop Clamps. We line the sides with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. It comes with full installation instructions to make the install easy. All our products are backed by a one year mfg. This Hard Lexan Back Panel is Brand New. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit some models and years shown in summary above. Clear Lexan (Tinted no longer available). If you are looking for a quality enclosure for your UTV, look no further. Please check out the pictures. We show you many close up shots that others shy away from. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line Windshield. You won’t be disappointed! Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Panel secured using permanent LOOP CLAMPS. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing ABOVE states. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Fits: HPX XUV (See description for model #)
  • Windshield: Yes – Lexan – 1 pc + lower abs panel + vents
  • Mfg. Warranty: One Year
  • Color: CLEAR Lexan 9034
  • SATISFACCTION GUARANTEED POLIC: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Surface Finish: 9034 Lexan – Clear
  • Manufacturer Part Number: USA-LBV-C JDGX15
  • Part Type: UTV Lexan
  • Part Name: Clear Lexan Back Panel w/ Loop clamp
  • YEARS: 2015-2021
  • Placement on Vehicle: Rear
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

Lexan Back Panel + Loop Clamps John Deere GATOR HPX XUV (2015-2021) UTV New

Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)

Lexan_Back_Panel_LoopClamps_John_Deere_GATOR_XUV_550_560_590_UTV_2012_21_01_ekx
Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)
Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)
Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)
Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)

Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)
Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Hard LEXAN BACK Panel. XUV 550 560 590. 2 Seats/ Side by Side UTV. JD Gator XUV 550, 560, 590. NOTE: Will fit 2021 model year ONLY if lower mfg hard doors removed. This does not apply to windshields. Soft Cab Enclosures with Soft Doors included. [this will only impact our soft enclosure styles that include soft doors]. Loop CLAMPS (permanent) are used to attach the Back Lexan Panel to the roll bars. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Standard Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan no longer available. VENTED: Open/Close by sliding. Vents can be omitted if you wish. MADE TO ORDER FOR YOU! Busy months are September-February. Individually Hand Tailored for a Precision Fit. Will NOT bow at high speeds! Absolutely Top of the Line Product. Great Shelter from All Weather. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Photo 1-2: Shows Clear Lexan Back on a John Deere Gator. NOTE: Sorry but we do not have a photo on the Gator 550 but for reference we have shown on a different Gator model. Photo 3: Close up of LOOP Clamps you will be receiving to attach lexan to your ROPS / roll bars. Photo 4: Close up a DOT stamp on the lexan. TOP OF THE LINE PRODUCT DESCRIPTION. The HARD Lexan Back Panel is truly the top of the line! They are hand crafted and tailored. For a precision fit. All HARD Lexan Back Panels are made of 1/4 LEXAN and they will NOT bow at high speeds. The Hard Lexan Back Panel uses the best clamping system available. With the Loop Clamps. We line the sides with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. It comes with full installation instructions to make the install easy. All our products are backed by a one year mfg. This Hard Lexan Back Panel is Brand New. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit some models and years shown in summary above. Clear Lexan (Tinted no longer available). If you are looking for a quality enclosure for your UTV, look no further. Please check out the pictures. We show you many close up shots that others shy away from. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line Windshield. You won’t be disappointed! Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Vents may be omitted if you wish. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Panel secured using permanent LOOP CLAMPS. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If your listings ABOVE states. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Fits: XUV
  • Windshield: Yes – Lexan – 1 pc
  • Mfg. Warranty: One Year
  • Color: CLEAR Lexan 9034
  • SATISFACCTION GUARANTEED POLIC: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Surface Finish: 9034 Lexan – Clear
  • Manufacturer Part Number: USA-LBV-C JDG550
  • Part Type: UTV Lexan
  • Part Name: Clear Lexan Back Panel w/ Loop clamp
  • YEARS: 2012-2021
  • Placement on Vehicle: Rear
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

Lexan Back Panel + LoopClamps John Deere GATOR XUV 550 560 590 UTV (2012-21)

Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)

Std_LEXAN_WINDSHIELD_Loop_Clamps_JOHN_DEERE_GATOR_XUV_550_560_590_2012_2021_01_tvb
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)

Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. STANDARD / Level 1. Clear + Spli+ Vented. XUV 550 560 590. 2 Seats Side by Side UTV’s. JD Gator XUV 550, 560, 590. NOTE: Will fit 2021 model year ONLY if lower mfg hard doors removed. This does not apply to windshields. Soft Cab Enclosures with Soft Doors included. [this will only impact our soft enclosure styles that include soft doors]. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. Unique 2pc / Split Windshield! Three Way Design allows rider to enjoy 1 Full Windshield, 2 Top Only, or 3 Bottom Only. Can be omitted if you prefer at no charge. Proudly Made in the USA. (Over Sized Box / Dimensional Weight Used). This Enclosure is MADE TO ORDER FOR YOU! Our busy season is September-December. Tailored for a Precision Fit. Will NOT bow at high speeds! Quick Connect Clamps make. Installation & Removal a Breeze! Absolutely Top of the Line Product. Great Shelter from All Weather. We have hauled our Lexan Windshield on UTV’s. Going 60 miles per hour with ZERO bowing! STANDARD – Level 1 Lexan Windshield Package — (High Quality at a Value Price). Clamp Connection to frame. These clamps are permanent. Dual vents in front of driver and passenger (open/close by sliding). Vents can be omitted if you wish. Heavy Duty Automotive Edge trim at hood line only of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Clamps are permanent on this level. ONLY install windshield wipers to our Level 3 MR-10 lexan windshield. Photo 1-4: Shows a clear, 2 pc Lexan Windshield on a JOHN DEERE “GATOR” UTV. NOTE: These photos show QC Clamps but will not include QC CLamps (sorry, no photos with loop clamps on this model). Please refer to photo 5 + 6 for the loop clamps included in this listing. Photo 5 + 6: Shows close up of the standard Loop Clamps used to attached lexan windshield to roll bars. NOTE: This listing includes loop clamps. Photo 6: Shows a close up of the vents in open position. Vents open/close by sliding. Can be removed if you wish. Photo 7: Close up of DOT Stamp in corner of lexan windshield. Photo 8: Close up of Standard LOOP Clamps on a different model of Gator for your reference only. This windshield is Brand New. Made to Order for YOU! TOP OF THE LINE PRODUCT DESCRIPTION. The Lexan Windshield is truly the top of the line! They are hand crafted and tailored. For a precision fit. All windshields are made of 1/4 LEXAN and they will NOT bow at high speeds. The windshield uses the best clamping system available… We line the sides of our windshields when necessary with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. All in all, our Lexan Windshield is a superior windshield. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! It comes with full installation instructions to make the install easy. The Windshield is backed by a one year mfg. This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above (please verify availability for the new models added each year/season before ordering). If you are looking for a quality, look no further. Please check out the pictures. We show you many close up shots that others shy away from. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line windshield. You won’t be disappointed! Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line Heavy Duty Materials. Windshield secured using LOOP Clamps. Due to the large sized box, a UPS oversized package surcharge applies & UPS uses dimensional weight instead of the actual weight. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). To the Lower 48 States Continental. Does not include AK, HI or PR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Windshield: Lexan / CLEAR / 2 pc./ Vents
  • Mfg. Warranty: One Year
  • Windshield Material: 9034 Lexan
  • Windshield Color: Clear
  • Fits: XUV 550 560 590
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • Surface Finish: 9034 Lexan
  • Manufacturer Part Number: USA-LG2-C JDG550
  • Part Type: UTV Windshield
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Part Name: Lexan Windshield w/ Loop Clamps
  • YEARS: 2012-2021
  • Level:: Standard, Level 1
  • Placement on Vehicle: Front
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

Std LEXAN WINDSHIELD + Loop Clamps JOHN DEERE GATOR XUV 550 560 590 (2012-2021)

TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors

TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors

TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors
Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Soft TOP Enclosure +. XUV / HPX / 550 – UTV’s. 1 Clear, 2pc/Split Lexan WINDSHIELD w/ dual vents. 2 Soft TOP (Cap) Enclosure. NOTE: Rear & Doors NOT Included. Our Lexan Windshield is now a 2 pc or split style. Dual Vents are now standard in our Lexan Windshields. They open/close by sliding. Vents can be omitted if you wish at no charge. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. Great for air flow on those hot summer days. Can remove just the top, or remove just the bottom, or both top & bottom. Made in the USA. COLOR – Choice of 3. Guard Woodland Camo, Mossy Oak BREAK-UP. This Enclosure is MADE TO ORDER FOR YOU! Our busy season is September-December. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). OUR Seven (7) Day SATISFACTION GUARANTEED POLICY. We offer a Seven (7) Day INSPECTION Period from the date of receipt. This JOHN DEERE “GATOR” package combines the Clear LEXAN WINDSHEILD and the Soft TOP Enclosure into an economical package for great protection during warmer months! Windshield Top uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multifilament polyester yarns. Along with the highest quality materials, all. Enclosures are hand measured and handcrafted to ensure a precise fit. All PacificEagleUSA windshields are made of 1/4 LEXAN and they will NOT bow at high speeds. The PacificEagleUSA windshield uses the best clamping system available… The Quick Connect Clamps. These QUICK CONNECT CLAMPS make installation a breeze! After installation, if you need to remove your windshield you just unscrew the knob bolts. After the clamps are on your roll bars, you never have to remove them to take your Windshield off. Just loosen the knob bolts to remove the Windshield. It’s Easy On….. Then when needed its Easy Off again. You are getting the best of both worlds here. We line the sides of our windshields when necessary with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. Windshield & Top provides shelter from rain, wind, sun, and snow. The Windshield & Top comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Windshield & Top kit for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to Order for You! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all model years. THREE (3) Standard Colors: Black, National Guard Woodland Camo. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. SPECIAL NOTE ABOUT PHOTOS. 1st Photo: JOHN DEERE “GATOR” with the a Split Lexan WINDSHIELD & Soft TOP Enclosure package (Rear is not included in this listing). 2nd Photo: Shows the clarity of our vinyl windows. 3rd Photo: Shows our Marine Canvas fabric and our premium quality of workmanship. 4th – 6th Photos: Shows a zipper which is not included on this package but is still provided to give you a feel of our quality of materials and workmanship on all our enclosures. Photo’s 7- 8 : Shows our standard colors available. Photo’s 9-11 : Show close up of the split lexan windshield and quick connect clamps. Photo 1 2: Close up of Vent which is now standard. The dual vents open/closes by sliding. Can be omitted if you wish at no charge. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT INCLUDED in this package… Refer to other styles if feature desired. 30 gauge Aqua View Vinyl Windows- rear panel & doors. Vinyl windows NOT INDLUDED in this package… All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT INCLUDED in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. This enclosure will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Rest of the World. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. OTHER ENCLOSURES & ACCESSORIES. FOR THESE MAKES & MODELS. John Deere Gator HPX XUV Cabs, Joyner Renegade Cab, Joyner Trooper Cab, Kawasaki Mule 600/610 Cab, Kawasaki 3000/3010, Kawasaki 3000/3010. TRANS Cab, Kawasaki 4000/4010 Cab, Kawasaki 4000/4010. TRANS Cab, Kawasaki Teryx Cab, Kubota Cab, Polaris Ranger Cab, Polaris RZR Cab, Polaris Ranger Crew Cab, Yamaha Rhino Cab. Full Cab Enclosures w/ Lexan WS. Full Cab Enclosures w/ Vinyl WS. Summer Cab Enclosures w/ Lexan WS. Mini Cab Enclosures w/ Vinyl WS. Top & Lexan Windshield. Top & Vinyl Windshield. Top & Rear Window Only (For your WS). Lexan Windshields w/ Quick Connect Clamps. Door & Rear Window Only (For your Top & WS). Roof TOP / Caps. Mud Stopper Half Doors. Soft Full Door Kits. Thank you for your kind understanding of our policy! Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. If the listing states we accept a return, the listing will state the time frame and any other requirements involved with a return. We can only offer MEDIA. On certain items (books, cd, dvd, ect). The item “TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors” is in sale since Tuesday, April 03, 2012. This item is in the category “eBay Motors\Parts & Accessories\ATV Parts\Other”. The seller is “pacificeagleusautvenclosures” and is located in Lexington, Kentucky. This item can be shipped to United States, Canada, Denmark, Finland, Greece, France, Germany, Austria, Australia, Japan, United Kingdom, Portugal, Sweden, Belgium, Ireland, Netherlands, Poland, Spain, Italy, Switzerland, Norway.
  • Fits: UTV
  • Part Brand: PACIFIC EAGLE USA / PacificEagleUSA
  • Manufacturer Part Number: Soft TOP Enclosure w/ Split Lexan Windshield
  • Surface Finish: Enclosure-Solids, Marine Canvas & Camo’s Corduva N
  • Windshield: Yes – Split Clear Lexan
  • Mfg. Warranty: YES – One Year
  • Color: Choice of 3 Standard Enclosure Colors
  • Top Included?: Yes
  • Doors Included?: NO
  • Back Panel Included?: NO
  • Windows-Rear & Doors?: NO Rear or Doors
  • SATISFACTION GUARANTEED POLICY: 7 Day Inspection Period (See Return Details)
  • RETURN POLICY: 14 Days / RMA # Required (See Return Details)
  • Package Includes:: Top & Clear Lexan Windshield (No doors or rear)
  • Warranty: Yes
  • Country/Region of Manufacture: United States

TOP & Lexan WINDSHIELD JOHN DEERE GATOR XUV HPX UTV Enclosure NEW 3 Colors