NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Clear + Split + Vented. XUV 835 + 865. 3 Seats Side by Side UTV’s. These models have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. Unique 2pc / Split Windshield! Three Way Design allows rider to enjoy 1 Full Windshield, 2 Top Only, or 3 Bottom Only. Can be omitted if you prefer at no charge. Proudly Made in the USA. (Over Sized Box / Dimensional Weight Used). This Enclosure is MADE TO ORDER FOR YOU! Our busy season is September-December. Tailored for a Precision Fit. Will NOT bow at high speeds! Quick Connect Clamps make. Installation & Removal a Breeze! Absolutely Top of the Line Product. Great Shelter from All Weather. We have hauled our Lexan Windshield on UTV’s. Going 60 miles per hour with ZERO bowing! DELUXE – Level 3 – MR10 Mar Resistant Lexan Windshield Top of the Line!! Clear, MR-10 / Mar-Resistant Lexan. MR10 used in top section (eye level area) only of our split 2pc style windshield. Bottom section is the 9034 lexan. Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and knob stay on UTV when windshield is off. 2 Piece / Split. Dual vents (open/close by sliding). One in front of driver, other in front of passenger. Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC.. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. The MR-10 has Margard II surface coating to help prevent scratching. Do not removed the protective film from the lexan until after you have installed. Tinted lexan no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. ONLY install windshield wipers to our Level 3 MR-10 lexan windshield. Photo 1-2: Shows a clear, 2 pc Lexan Windshield on a JOHN DEERE “GATOR” UTV. NOTE: Soft TOP shown in photo 2 is NOT INCLUDED. Photo 3: Shows a close up of the vents in open position. Vents open/close by sliding. Can be removed if you wish. Photo 4-5: Shows close up of the Quick Connect Clamp KNOBS used in this listing. Photo 6: Close up of DOT Stamp in corner of lexan windshield. This windshield is Brand New. Made to Order for YOU! TOP OF THE LINE PRODUCT DESCRIPTION. The Lexan Windshield is truly the top of the line! They are hand crafted and tailored. For a precision fit. All windshields are made of 1/4 LEXAN and they will NOT bow at high speeds. The windshield uses the best clamping system available… The Quick Connect Clamps. These QUICK CONNECT CLAMPS make installation a breeze! After installation, if you need to remove your windshield you just unscrew the knob bolts. After the clamps are on your roll bars, you never have to remove them to take your Windshield off. Just loosen the knob bolts to remove the Windshield. It’s Easy On….. Then when needed its Easy Off again. You are getting the best of both worlds here. We line the sides of our windshields when necessary with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. All in all, our Lexan Windshield is a superior windshield. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! It comes with full installation instructions to make the install easy. The Windshield is backed by a one year mfg. This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above (please verify availability for the new models added each year/season before ordering). If you are looking for a quality, look no further. Please check out the pictures. We show you many close up shots that others shy away from. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line windshield. You won’t be disappointed! Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line Heavy Duty Materials. Windshield secured using Quick Connect Clamps for Easy On or Easy Off when required. Due to the large sized box, a UPS oversized package surcharge applies & UPS uses dimensional weight instead of the actual weight. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). To the Lower 48 States Continental. Does not include AK, HI or PR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If the listing ABOVE states. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Windshield: Lexan / CLEAR / 2 pc split / VENTS
• Mfg. Warranty: One Year
• Windshield Material: MR10 MarResistant Lexan
• Windshield Color: Clear
• Fits: XUV 835 + 865
• SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
• Surface Finish: MR10 MarResistant Lexan
• Manufacturer Part Number: USA-LM2-C JDG835
• Part Type: UTV Windshield
• RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
• Part Name: Lexan Windshield w/ Quick Connect Clamps
• YEARS: 2018-2021
• Level: Deluxe, Level 3
• Placement on Vehicle: Front
• Brand: Desert Exchange / PacificEagleUSA
• Warranty: Yes