NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2-3 Seats Side by Side UTV. For older model years, please refer too our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Tired of Mud flying up into your cab? Then our MUD STOPPER Doors will solve that problem! 1 Pair of MUD STOPPER Doors. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Side release buckles allow quick opening & closing of the doors. This JOHN DEERE GATOR package includes our Soft MUD STOPPER Half DOOR for great protection from mud and stones. Mud Stopper Door uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. It is specifically designed to fit the John Deere gator XUV HPX models. It adheres to the roll cage with heavy duty YKK hook & loop Velcro. It has side release buckles which allow quick opening and closing of the doors. An additional webbing panel is sewn into each door for increased stability. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all. Enclosures are hand measured and handcrafted to ensure a precise fit. MUD STOPPER Door provides protections at an affordable price. The package comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the package for easy installation. ATTACHMENT: Our enclosures are attached to the roll bars, frame members, and/or body at various points using Hook & Loop closure with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Hook & Loop attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Hook + Loop can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Hook + Loop kit. This enclosure is BRAND NEW. Made to Order for You! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above (please verify availability for the new models added each year/season before ordering). Standard Colors: Black or Mossy Oak BREAK UP. Marine canvas, 600 Denier TOP GUN brand, acrylic-coated100% polyester, is water repellent, tear resistant, puncture resistant, mildew & UV resistant with less than 1% stretch or shrinkage. CAMO patterns are a heavy duty 1000 Denier CORDURA nylon rugged fabric made from Invista’s acclaimed, patented high performance polymer, designed for superior strength & abrasion resistance, coated Polyurethane on one side for water resistance. Plus, Mossy Oak Camo which is a 600 Deiner 100% Polyester material manufactured with a 2 pass Polyurethane Coating for water resistance. Custom colors available by special order an addl. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. PHOTO 1: Shows John Deere GATOR with the Soft MUD STOPPER Half DOOR Enclosure installed. PHOTO 2: Shows Mud Stopper Half Door laying flat and not mounted (photo of different make/model). This shows the outside of the door with buckle style enclosure to the roll bar and hook + loop closure. 2nd photo: Shows our Marine Canvas fabric and our quality of workmanship. PHOTO 3: Shows a Mud Stopper Half Door laying flat and not mounted (photo of different make/model). This is the inside of the door and is lined with vinyl for easy cleaning. Shows bucket style attachment to the roll bar and hook + loop closures. PHOTO 4-8: Show our high quality materials and workmanship provided on all our enclosures. NOTE: We s how a vinyl window and a zipper which are not included in this package but is still provided to give you a feel of our quality of materials and workmanship on all our enclosures. PHOTO 9: Shows our standard colors available. Even though this package does not include a zipper, vinyl windshield or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. YKK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if feature desired. 30 gauge Aqua View Vinyl Windows- rear & doors (vinyl used on the back side of each door for ea se of cleaning). Vinyl Windows NOT included in this package… All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Lexan Windshield NOT included in this package… Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Hool & Loop. Military Hook & Loop closure rated from 0 to 120 degrees F. Includes Installation and Care Instructions. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Fits: HPX XUV(see listing summary for models)
• Mfg. Warranty: YES – One Year
• Color: Black or Mossy Oak BreakUp
• SATISFACTION GUARANTEE POLICY: 14 Day Inspection Period (see Return details)
• RETURN POLICY: 30 Days / RMA# Required (see Return details)
• This Enclosure Styles Includes: Soft lower Half Doors: Right & Left Sides
• Surface Finish: Solids-Marine Canvas & Camo’s Cordura Nylon
• Manufacturer Part Number: USA-MSD JDGX15
• Part Type: UTV Cover or Enclosure
• Part Name: Mud Stopper Doors
• YEARS: 2015-2021
• Placement on Vehicle: Left, Right
• Brand: Dixie Desert Exchange PacificEagleUSA
• Warranty: Yes