NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Soft Full DOOR Kit. (includes driver and passenger sides). 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2 Seats Side by Side UTV’s. For older model years, please refer to our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. NOTE: Does NOT fit Deluxe Cab models. Doors open/close using industrial strength zippers. Doors can be unzipped, rolled back, and then secured in open position with tabs/straps included for those warmer days. 1 Soft Full Doors w/ vinyl windows. (both driver & passenger sides). (EXCLUDES: Windshield / Top / Rear). NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Our JOHN DEERE “GATOR” XUV HPX Soft Full DOORS is designed for use with the factory hard windshield, hard rear window and poly top. The uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windows are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. The doors open and close using YKK zippers manufactured using a state-of-the art injection technique and are attached to the strongest cord and tape made. The YKK zippers offer crosswise strength that’s unmatched in the industry. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all Enclosures are hand measured and handcrafted to ensure a precise fit. The cab’s doors roll away to allow for an open cab environment for warmer days. Excellent shelter from rain, wind, sun, and snow. The comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the kit for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. Photo 1-2: Shows DOORS on a JD Gator. Shows our premium quality materials and workmanship used on all our enclosure styles. Photo 8-9: Show our standard colors available for our enclosures. Woodland Camo is no longer available. Photo 10: Shows doors on another make/model for reference. Photo 11: Shows doors roll back and secured open on another make/model for reference. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. This enclosure is Brand New. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. Standard Colors: Black or Mossy Oak Break-Up. Custom colors available by special order an addl. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of adhesive hook & loop fasteners hold the enclosure tight in place. This kit comes with full instructions. Our enclosures are attached to the roll bars, frame members, and/or body at various points using with self adhesive backing (placement will be different for each make/model). These Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Some owners remove the enclosure completely and elect to leave the Hook & Loop attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Hook & Loop from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Hook & Loop can be removed and the surface cleaned with a remover like Goof-Off. If you have a hard windshield and/or a poly top currently installed, they will need to be released to do the initial installation. Please check out the pictures. We show you many close up shots that others shy away from. You can see the large sized zippers and the clarity of view through the heavy vinyl windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed! OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. Allows vinyl windows to open. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay-True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Doors open/close using YKK zippers manufactured using state-of-the-art injection technique & attached to the strongest cord & tape made. Large Industrial, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. Zippers are rated for colder temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. Front Windshield NOT available in this package – this Package assumes you own a W/S already. Doors Un-zip and Roll Back to be secured safely open with Velcro. Velcro rated from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Does NOT fit the Deluxe Cab models. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame or ROPS installed. Please let us know if your ROPS (roll bars) have been modified from stock mfg issue. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Once the item ships from the mfg facility, it is yours. Once it ships, it’s out of our control. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. If Listing States. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). The item “Soft Full DOOR Kit John Deere GATOR HPX / XUV (2015-2021) New UTV” is in sale since Wednesday, July 14, 2021. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in Lexington, Kentucky. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Fits: XUV HPX (see description for model #)
• Windshield: No Windshield – You already have a hard windshield
• Mfg. Warranty: Yes – ONE YEAR
• Colors Available: Black or Mossy Oak BreakUp
• Top: No Top-You already have a poly top
• Doors Included?: Yes – with vinyl windows
• Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
• Manufacturer Part Number: USA-DOO JDGX15
• Part Type: UTV Cover or Enclosure
• SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
• RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
• GTIN: Does not apply
• Rear Panel included?: NO
• YEARS: 2015-2121
• Soft Cab System: MODULAR
• Rear included?: NO
• Placement on Vehicle: Left
• Brand: Desert Exchange / PacificEagleUSA
• Warranty: Yes