SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)

SUMMER_CAB_top_rear_w_LEXAN_Windshield_John_Deere_GATOR_RSX_850_860_2013_20_01_eir
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)

SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. There are many details, so please READ FULL LISTING BEFORE ORDERING. Please ask any questions prior to ordering. We attempt to describe in detail but if we missed anything or you wish clarification, be sure to ask us prior to ordering. If you don’t see what your looking for.. Clear + 2pc Split + Vented. RSX 850 + RSX 860. 2 Seats side-by-side UTV’s. Soft Cab System: STANDARD. 1 Clear / Split / Vented LEXAN WINDSHIELD with Quick Connect Clamps. 2 Soft TOP (Cap). 3 Soft REAR PANEL with Vinyl Window. (EXCLUDES: DOORS) ROPS NOT INCLUDED. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. 2 piece or split style lexan windshield. They open/close by sliding. Vents can be omitted if you wish at no charge. Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Shows Lexan Windshield with QC Clamps on John Deere GATOR. Cab on a Gator (front lexan windshield + top + rear window – no doors) for warmer weather use. Photo 2: Shows soft TOP you will receive on a John Deere GATOR. Photo 3: Shows soft Rear Panel with Vinyl Window on John Deere GATOR. Photo 4: Close of Quick Connect Clamps. Photo 5: Vents in lexan windshield. One in front of driver and another for passenger. Shows the clarity of view through our vinyl windows (rear window on this enclosure style). Premium quality of materials and workmanship used on our enclosures. Some items not used on this enclosure style (like the zipper) but still shown to give you a feel of our enclosures. Standard colors available for our enclosures. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Our John Deere GATOR Summer Cab enclosure combines the Clear LEXAN WINDSHEILD, the Soft TOP, and the REAR PANEL with a Vinyl WINDOW all into an economical package! The SUMMER CAB Enclosure uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windshield and rear window are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all Enclosures are hand measured and handcrafted to ensure a precise fit. The SUMMER Cab provides shelter from rain, wind, sun, and snow. The Summer Cab comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Summer Cab package for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above. (please verify availability for the new models added each year/season before ordering). SOLID Marine canvas, 600 Denier TOP GUN brand, acrylic-coated100% polyester, is water repellent, tear resistant, puncture resistant, mildew & UV resistant with less than 1% stretch or shrinkage. CAMO patterns are a heavy duty 1000 Denier CORDURA nylon rugged fabric made from Invista’s acclaimed, patented high performance polymer, designed for superior strength & abrasion resistance, coated Polyurethane on one side for water resistance. Plus, Mossy Oak Camo which is a 600 Deiner 100% Polyester material manufactured with a 2 pass Polyurethane Coating for water resistance. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-fillament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. OPTIONS available but not included in this listing. 2 Vents in lexan can be omitted. Just let us know if desired. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. KK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if desired. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Vents are standard in the lexan windshield but vents can be omitted if you wish. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Enclosures are soft and designed to work the standard Mfg ROPS. This listing does not include ROPS or roll bars. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank You for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used.
SUMMER CAB (top+rear) w LEXAN Windshield John Deere GATOR RSX 850 860 (2013-20)

SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4

SUMMER_CAB_w_LEXAN_Windshield_WS_Top_Rear_John_Deere_GATOR_XUV_825_S4_855_S4_01_tdl
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4

SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. There are many details, so please READ FULL LISTING BEFORE ORDERING. Please ask any questions prior to ordering. We attempt to describe in detail but if we missed anything or you wish clarification, be sure to ask us prior to ordering. If you don’t see what your looking for.. Clear + 2pc Split + Vented. XUV / Full Size / 4 Seats. 825i / 855d / 825m /855m. 2-3 Seat side-by-side UTV’s. John Deere Gator XUV 825i S4 + 825m S4. John Deere Gator XUV 855d S4 + 855m S4. Soft Cab System: STANDARD. Strapping underneath the Soft TOP for support. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. 1 Clear / Split / Vented LEXAN WINDSHIELD with Quick Connect Clamps. 2 Soft TOP (Cap). 3 Soft REAR PANEL with Vinyl Window. (EXCLUDES: DOORS) Of course, ROPS NOT INCLUDED. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. 2 piece or split style lexan windshield. They open/close by sliding. Vents can be omitted if you wish at no charge. Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Combine the three pieces shown (lexan windshield, Soft Top, and Soft Back Panel) to create your SUMMER. Cab on a Gator for warmer weather use. Photo 1: Shows the Clear / Split Lexan Windshield secured using Quick Connect Clamps to your UTV roll bars. Note: Poly top shown is not included. Photo 4: Shows the straps under the soft top. Photo 5: Close of Quick Connect Clamps. Photo 6: Vents in lexan windshield. One in front of driver and another for passenger. Can be omitted if you wish. Shows the clarity of view through our vinyl windows (rear window on this enclosure style). Premium quality of materials and workmanship used on all soft enclosures. Some items not used on this enclosure style (like the zipper) but still shown to give you a feel of our enclosures. Standard colors available for our enclosures. Woodland Camo no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Our John Deere GATOR Summer Cab enclosure combines the Clear LEXAN WINDSHEILD, the Soft TOP, and the REAR PANEL with a Vinyl WINDOW all into an economical package! The SUMMER CAB Enclosure uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windshield and rear window are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all Enclosures are hand measured and handcrafted to ensure a precise fit. The SUMMER Cab provides shelter from rain, wind, sun, and snow. The Summer Cab comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Summer Cab package for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. Includes a PREMIUM – Level 2 Lexan Windshield (Mid-Range). Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and know stay on UTV when windshield is off. Lexan (Can run both pieces for full coverage, for air flow just run bottom or top). Dual vents (open/close by sliding). Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan is no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. We only recommend installing windshield wipers to our Level 3 MR-10 lexan windshield (our Deluxe / Level 3 lexan windshield). This enclosure is BRAND NEW. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above. (please verify availability for the new models added each year/season before ordering). SOLID Marine canvas, 600 Denier TOP GUN brand, acrylic-coated100% polyester, is water repellent, tear resistant, puncture resistant, mildew & UV resistant with less than 1% stretch or shrinkage. CAMO patterns are a heavy duty 1000 Denier CORDURA nylon rugged fabric made from Invista’s acclaimed, patented high performance polymer, designed for superior strength & abrasion resistance, coated Polyurethane on one side for water resistance. Plus, Mossy Oak Camo which is a 600 Deiner 100% Polyester material manufactured with a 2 pass Polyurethane Coating for water resistance. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-fillament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. OPTIONS available but not included in this listing. 2 Vents in lexan can be omitted. Just let us know if desired. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. KK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if desired. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Enclosures are soft and designed to work the standard Mfg ROPS. This listing does not include ROPS or roll bars. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank You for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Fits: XUV 825i 825m 855d 855m
  • Windshield: Yes – 9034 LEXAN / Clear / Split 2pc / Vents
  • Mfg. Warranty: YES – One Year
  • Top Included?: Yes
  • Doors Included?: NO
  • Back Panel Included?: Yes – Rear with Vinyl Window
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
  • Manufacturer Part Number: USA-TCA-BCK-LB2-C JDGXS4
  • Part Type: Cover or Enclosure
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Mini Cab Enclosure Includes:: Lexan Windshield, Top + Rear Window – No Doors
  • Lexan COLOR: Clear Lexan
  • Color: Black or Mossy Oak BreakUp
  • Part Name: Summer Cab w/ Lexan Windshield (WS/Top/Rear)
  • Soft Cab System: STANDARD
  • Placement on Vehicle: Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

SUMMER CAB w LEXAN Windshield(WS/Top/Rear) John Deere GATOR XUV 825 S4 +855 S4

SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)

SUMMER_CAB_LEXAN_Windshield_Top_Rear_John_Deere_GATOR_XUV_550_560_590_2012_21_01_uz
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)

SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. There are many details, so please READ FULL LISTING BEFORE ORDERING. Please ask any questions prior to ordering. We attempt to describe in detail but if we missed anything or you wish clarification, be sure to ask us prior to ordering. If you don’t see what your looking for.. Clear + 2pc Split + Vented. XUV 550 560 590. 2 Seats side-by-side UTV’s. JD Gator XUV 550, 560, 590. NOTE: Will fit 2021 model year ONLY if lower mfg hard doors removed. This does not apply to windshields. Soft Cab Enclosures with Soft Doors included. [this will only impact our soft enclosure styles that include soft doors]. 1 Clear / Split / Vented LEXAN WINDSHIELD with Quick Connect Clamps. 2 Soft TOP (Cap). 3 Soft REAR PANEL with Vinyl Window. (EXCLUDES: DOORS) ROPS NOT INCLUDED. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. 2 piece or split style lexan windshield. They open/close by sliding. Vents can be omitted if you wish at no charge. Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Shows soft TOP and REAR combo enclosure on a John Deere Gatore. Photo 2: Shows cut out for light. Photo 3: Shows how rear panel fits behind the tilted rear. Photo 4 -6: Shows the Clear / Split Lexan Windshield secured using Quick Connect Clamps to attach lexan windshield to John Deere Gator UTV. Photo 5: Shows the vents which will be mounted in lower lexan. Vents open/close by sliding. Vents can be omitted if you wish. Photo 6: Shows close up of Quick Connect Clamps used wish will secure lexan to roll bars. Woodland camo is no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Our John Deere GATOR Summer Cab enclosure combines the Clear LEXAN WINDSHEILD, the Soft TOP, and the REAR PANEL with a Vinyl WINDOW all into an economical package! The SUMMER CAB Enclosure uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windshield and rear window are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all Enclosures are hand measured and handcrafted to ensure a precise fit. The SUMMER Cab provides shelter from rain, wind, sun, and snow. The Summer Cab comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Summer Cab package for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above. (please verify availability for the new models added each year/season before ordering). SOLID Marine canvas, 600 Denier TOP GUN brand, acrylic-coated100% polyester, is water repellent, tear resistant, puncture resistant, mildew & UV resistant with less than 1% stretch or shrinkage. CAMO patterns are a heavy duty 1000 Denier CORDURA nylon rugged fabric made from Invista’s acclaimed, patented high performance polymer, designed for superior strength & abrasion resistance, coated Polyurethane on one side for water resistance. Plus, Mossy Oak Camo which is a 600 Deiner 100% Polyester material manufactured with a 2 pass Polyurethane Coating for water resistance. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-fillament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. OPTIONS available but not included in this listing. 1 Vents in lexan can be omitted. Just let us know if desired. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. KK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if desired. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Enclosures are soft and designed to work the standard Mfg ROPS. This listing does not include ROPS or roll bars. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank You for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Fits: XUV 550 560 590
  • Windshield: Yes – 9034 LEXAN / Clear / Split / Vents
  • Mfg. Warranty: YES – One Year
  • Top Included?: Yes
  • Doors Included?: NO
  • Back Panel Included?: Yes – Rear with Vinyl Window
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
  • Manufacturer Part Number: USA-TCA-BCK-LB2-C JDG550
  • Part Type: Cover or Enclosure
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Mini Cab Enclosure Includes:: Lexan Windshield, Top + Rear Window – No Doors
  • Lexan COLOR: Clear Lexan
  • Color: Black or Mossy Oak BreakUp
  • Part Name: Summer Cab w/ Lexan Windshield (WS/Top/Rear)
  • YEARS: 2012-2021
  • Soft Cab System: STANDARD
  • Placement on Vehicle: Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

SUMMER CAB (LEXAN Windshield+Top+Rear) John Deere GATOR XUV 550 560 590(2012-21)

SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV

SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV

SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV
There are many details, so please READ FULL LISTING BEFORE ORDERING. Please ask any questions prior to ordering. We attempt to describe in detail but if we missed anything or you wish clarification, be sure to ask us prior to ordering. If you don’t see what your looking for.. With Clear 2 pc / Split LEXAN WINDSHIELD. 2-Passenger side-by-side UTV’s. 1 Clear LEXAN WINDSHIELD 2pc/vented. 2 Soft TOP (Cap). 3 Soft REAR PANEL with Vinyl Window. (DOORS NOT INCLUDED/ROPS NOT INCLUDED). NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. Our Lexan Windshield is now a 2 pc or split style. Dual Vents are now standard in our Lexan Windshields. They open/close by sliding. Vents can be omitted if you wish at no charge. Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up. (Note; even though National Guard Woodland still shown on photo, it is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Our busy season is September-December. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). OUR Seven (7) Day SATISFACTION GUARANTEED POLICY. We offer a Seven (7) Day INSPECTION Period from the date of receipt. SPECIAL NOTES ABOUT PHOTOS. Cab on a Gator (front lexan windshield + top + rear window – no doors) for warmer weather use. The Rear Window Panel is rolled up and secured in an open position in this view. Photo 2: Rear Vinyl Window taken from inside cab. Photo 3: View from the rear showing the soft top with the rear window rolled up and secured open. Photo 4 : Clear / Split Lexan Windshield secured using Quick Connect Clamps install the lexan windshield to your UTV. Shows the clarity of view through our vinyl windows (rear window on this enclosure style). Premium quality of materials and workmanship used on our enclosures. Some items not used on this enclosure style (like the zipper) but still shown to give you a feel of our enclosures. Standard colors available for our enclosures. Photo 9: Close of Quick Connect Clamps-Photo 10: Vents in lexan windshield. One in front of driver and another for passenger. Our John Deere GATOR Summer Cab enclosure combines the Clear LEXAN WINDSHEILD , the Soft TOP , and the REAR PANEL with a Vinyl WINDOW all into an economical package! SUMMER CAB Enclosure uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windshield and rear window are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multifilament polyester yarns. Along with the highest quality materials, all. Enclosures are hand measured and handcrafted to ensure a precise fit. SUMMER Cab provides shelter from rain, wind, sun, and snow. The Summer Cab comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Summer Cab package for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. MODEL YEARS: It will fit all model years (please verify availability for the new models added each year/season before ordering). THREE (3) Standard Colors: Black, Hemp Beige, National Guard Woodland Camo. SOLID Marine canvas, 600 Denier TOP GUN brand, acrylic-coated100% polyester, is water repellent, tear resistant, puncture resistant, mildew & UV resistant with less than 1% stretch or shrinkage. CAMO patterns are a heavy duty 1000 Denier CORDURA nylon rugged fabric made from Invista’s acclaimed, patented high performance polymer, designed for superior strength & abrasion resistance, coated Polyurethane on one side for water resistance. Plus, Mossy Oak Camo which is a 600 Deiner 100% Polyester material manufactured with a 2 pass Polyurethane Coating for water resistance. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-fillament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS available but not included in this listing. 2 Vents in lexan can be omitted. Just let us know if desired. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. KK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if desired. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. Rest of the World. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Enclosures are soft and designed to work the standard M fg ROPS. This listing does not include ROPS or roll bars. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). OTHER ENCLOSURES & ACCESSORIES. FOR THESE MAKES & MODELS. John Deere Gator HPX XUV Cabs, Joyner Renegade Cab, Joyner Trooper Cab, Kawasaki Mule 600/610 Cab, Kawasaki 3000/3010, Kawasaki 3000/3010. TRANS Cab, Kawasaki 4000/4010 Cab, Kawasaki 4000/4010. TRANS Cab, Kawasaki Teryx Cab, Kubota Cab, Polaris Ranger Cab, Polaris RZR Cab, Polaris Ranger Crew Cab, Yamaha Rhino Cab. Full Cab Enclosures w/ Lexan WS. Full Cab Enclosures w/ Vinyl WS (not available RZR). Summer Cab Enclosures w/ Lexan WS. Mini Cab Enclosures w/ Vinyl WS (not available RZR). Top & Lexan Windshield. Top & Vinyl Windshield (not available RZR). Top & Rear Window Only (For your WS). Lexan Windshields w/ Quick Connect Clamps. Door & Rear Window Only (For your Top & WS). Roof TOP / Caps. Mud Stopper Half Doors. Soft Full Door Kits. Thank you for your kind understanding of our policy! Thank You for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. If the listing states we accept a return, the listing will state the time frame and any other requirements involved with a return. We can only offer MEDIA. On certain items (books, cd, dvd, ect). The item “SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV” is in sale since Friday, September 25, 2015. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “pacificeagleusautvenclosures” and is located in Lexington, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Finland, Australia, Greece, Portugal, Japan, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Switzerland, Norway.
  • Fits: John Deere Gator XUV / HPX / 550
  • Manufacturer Part Number: USA-TCA-BCK-LB-C
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
  • Windshield: Yes – LEXAN / Clear / Split 2pc / Vwnts
  • Mfg. Warranty: YES – One Year
  • Top Included?: Yes
  • Doors Included?: NO
  • Back Panel Included?: Yes – Rear with Vinyl Window
  • Windows-Rear & Doors?: Yes, Rear Vinyl Window
  • SATISFACTION GUARANTEED POLICY: 7 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 14 Days / RMA # Required (See RETURN Details)
  • Mini Cab Enclosure Includes:: Lexan Windshield, Top + Rear Window – No Doors
  • Lexan COLOR: Clear Lexan
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Color: Black or Mossy Oak BreakUp
  • Part Type: Cover or Enclosure
  • Brand: Desert Exchange / PacificEagleUSA
  • Placement on Vehicle: Front
  • Part Name: Summer Cab w/ Lexan Windshield (WS/Top/Rear)
  • GTIN: Does not apply

SUMMER CAB with Clear Split LEXAN Windshield (WS/Top/Rear) John Deere GATOR UTV